What matters should be paid attention to when applying industrial aluminum profiles?

1. Lukewarm water containing lubricating fluid or neutral detergent should be used to clean, not acidic or alkaline detergent.

2. After removing the aluminum profile, it is best to use high-quality paint to maintain wax on anodic oxidation treatment film to carry out glazing solution, but also can evenly paint a layer of acrylic lip-based water paint.

3. Prohibit loose loading of aluminum profiles during transportation, resulting in knock injuries.

4. Cleaning supplies to soft rag, cotton towel is appropriate, prohibit the use of corundum powder, grinding sandpaper, steel brush or other friction cleaning aluminum alloy doors and Windows surface.

5. According to the conditions adopted, aluminum doors and Windows should be cleaned on time.

6. When the surface of aluminum profile is corroded and damaged, it should be cleaned immediately. 80 types of aluminum profile scale can be cleaned with soft cloth dipped in ethanol first, and then cleaned with water. If the copper content in the tank is also high, the unsmooth surface will be more serious. Usually, if the content of sodium cyanide in the tank is too high, the anodic oxidation process reflects strongly, resulting in "boiling" condition. If the sodium cyanide content is normal and the copper content is high, the surface of the aluminum profile after water cleaning has a very significant layer of metallic material copper symptom tone. If the symptom of copper is dark, the copper content in the surface tank is high, and some effective measures should be taken to adjust the content of sodium cyanide and copper to the conventional range. If the content contains copper, add as little as possible; If the copper in the tank comes from the anodic oxidation process of copper aluminum profiles, some effective measures should be taken to add non-copper additives or adjust the tank liquid. After anodic oxidation process of industrial aluminum profile, the surface of aluminum profile is not smooth, which may be caused by the high content of sodium cyanide in the tank liquid and acidic corrosion. There may also be defects in the internal mechanism of the aluminum profile causing the surface is not smooth.

Do you know what matters should be paid attention to when aluminum profile processing manufacturers apply industrial aluminum profiles?