The industrial aluminum profile that everybody refers to is the industrial aluminum profile that assembly structure uses generally, it is this kind of cross section is square or rectangle, all around take groove, the aluminum profile with hole in the middle.

Do we all know the characteristics of industrial aluminum profiles?

1, there are a variety of different specifications, specifications, and the long side and the long side of the specification is multiplier, for example, we commonly used 4040,4080,40120,4040 is square, four sides are all 40mm,4080 is the long side 80mm, the long side 40mm, the long side is 2 times the short side. Nature is also unique, such as 4060, the long side is 1.5 times the long side.

2, the total width of the notch is only two, 8mm and 10mm, although there are hundreds of thousands of industrial aluminum specifications and models, but the two notch is basically only these two specifications, especially subtle, such as 2020 notch is 6mm, because of the application of basic spare parts.

We know that industrial aluminum profiles are generally used to bolt and nut T-nut connection, and this kind of spare parts are all practical specifications, so aluminum profiles in the design scheme is to take full account of assembling spare parts.

3. There are two national standards and European standards. The difference between European standard aluminum profile and national standard aluminum profile also lies in the notch. The European standard for trapezoidal groove, small on, in, under, the national standard groove for the square groove, about the same.

Gb and THE European standard application of the connector is not the same, I feel the European standard industrial aluminum is stronger, the size of the European standard is more than the national standard, there are some customized non-standard industrial aluminum, can also use the European standard connector can also use the NATIONAL standard connector.

4, industrial aluminum wall thickness is not easy to thin, industrial aluminum is not like engineering construction aluminum, some only have decorative effect, wall thickness will do very thin, industrial aluminum is generally a pillar effect, must be a certain load capacity, so the wall thickness can not be too thin.

Aluminum profile manufacturers tell you the characteristics of industrial aluminum profiles